Jump to content
WAPT Forum
Sign in to follow this  
Guest moti_gorin

Wapt results...

Recommended Posts

Guest moti_gorin

Hello all i have a trail version of wapt 5.0.

When i finished the test there is a graph that i didn't really understand.

i attached the graph if you wil help me to figure it up!!

 

post-89-1210593298.jpg

Share this post


Link to post
Share on other sites
Guest angela
Hello all i have a trail version of wapt 5.0.

When i finished the test there is a graph that i didn't really understand.

i attached the graph if you wil help me to figure it up!!

 

 

Hello!

 

The green line on the graph shows the average response time of server to users' requests (avg response time). The black line with dots shows the number of users. The graph shows the average time of server response for each user.

 

Please let me know why you marked some values in red? Is there something wrong with them?

Share this post


Link to post
Share on other sites
Guest moti_gorin

Hey and 10x for the quick replay..

 

so.. if i understand what you explaind- My red mark

 

is that at 1:40 minute when i had 20 user at the site they had 5 seconds of wating before the page is loaded...

 

so i don't know why the graph isn't a straight line? at 00:30 time of the check the responed time was something like 9 seconds?

 

 

 

and last thing how can convert scenario of wapt 3.0 to wapt 5.0??

 

thenk you very very much!

 

Moti gorin

Share this post


Link to post
Share on other sites
Guest angela
Hey and 10x for the quick replay..

 

so.. if i understand what you explaind- My red mark

 

is that at 1:40 minute when i had 20 user at the site they had 5 seconds of wating before the page is loaded...

 

so i don't know why the graph isn't a straight line? at 00:30 time of the check the responed time was something like 9 seconds?

 

In the moments marked by you you have the average time of waiting for response from server 9 and 5 seconds.

 

 

and last thing how can convert scenario of wapt 3.0 to wapt 5.0??

 

thenk you very very much!

 

Moti gorin

 

You can import a scenario from v3.0 to v5.0

Please click File - > Import...

WAPT 3.0 scenario files have the extension .wts.

 

 

Share this post


Link to post
Share on other sites
Guest moti_gorin

Hello again..

Another Question:

 

if i made a scenario that every 5 minute there are another 50 users

why at the "Overall performance" graph there is no pick of 50 "pages/sec" every 5 minute?

the 50 user aren't entering at the same minute?

 

because at the graph is shown that the maximum pages per second is 20 (->300 users).

 

Have a nice day

Moti

Share this post


Link to post
Share on other sites
Guest angela
Hello again..

Another Question:

 

if i made a scenario that every 5 minute there are another 50 users

why at the "Overall performance" graph there is no pick of 50 "pages/sec" every 5 minute?

the 50 user aren't entering at the same minute?

 

because at the graph is shown that the maximum pages per second is 20 (->300 users).

 

Have a nice day

Moti

 

The matter is that the trial version supports only maximum of 20 virtual users.

A registered version has no restrictions on the number of virtual users. This number is limited most of all by your computer's hardware configuration and operating system. Also, it strongly depends on the specific test scenario. An estimated number of simultaneously acting simulated users for the "average" test scenario and for the following standard hardware configuration: Intel Pentium III 1000 MHz PC, 256-512 MB RAM, 100 MB LAN should stand at about 500-1000. In some cases, WAPT can simulate up to 1500-1800 simultaneously acting users from a single computer.

 

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...